Compact and durable 130mm Wire Stripper Cutter (E-2024), ideal for precise wire stripping and cutting in electrical and DIY applications.

Eastman Combination Plier Auto Black 200 mm (Double Colour Sleeve) is a heavy-duty 8-inch multipurpose plier designed for gripping, cutting, bending, and twisting wires in electrical and automotive applications.

3-in-1 Multifunctional Plier – Eastman is a versatile hand tool combining gripping, cutting, and stripping functions to handle a range of wire and mechanical tasks with a single compact tool.

High-capacity 3.7V 6000mAh rechargeable battery designed for long-lasting performance in electronic devices, offering reliable power, durability, and efficient energy output.

2000mAh capacity for reliable backup power Stable 3.7V output for consistent performance Rechargeable lithium-ion battery Compact and lightweight design Ideal for portable electronic devices

3.7V 2200mAh rechargeable lithium battery provides reliable and long-lasting power for DIY electronics and portable devices.

9V battery is a compact power source commonly used in electronic projects, sensors, toys, and testing circuits.

The Duracell AA 1.5V Alkaline Battery is a long-lasting and reliable power source for everyday electronic devices. It delivers consistent performance and is ideal for high and low-drain applications.

Reliable and long-lasting Nippo Cell designed for everyday electronic devices like remotes, toys, clocks, and flashlights.

High-performance 3.2V 15Ah LiFePO4 (LFP) cells designed for energy storage systems (ESS). A-grade CNAE 32140 cells ensure long cycle life, safety, and reliable power output. Supplied in a pack of 40 cells for scalable battery solutions.

HIGHSTAR IFPP40130220 3.2V 100Ah is a high-capacity LiFePO₄ (Lithium Iron Phosphate) battery cell, supplied as a set of 8 pieces for energy storage and power system applications

Reliable 1.5V Everyday Blue battery cell designed for consistent performance in daily-use devices. Ideal for remotes, clocks, toys, and small electronics.

Compact and lightweight CR2032 3V Coin Cell battery ideal for powering small electronic devices like watches, calculators, remote controls, and IoT modules. Offers reliable performance and long shelf life.

Lithium-Ion Cell 4500mAh (DMEGC) is a high-capacity rechargeable battery cell engineered for extended runtime and reliable performance in battery packs and portable electronics applications.

Digital temperature and humidity sensor module with single‑wire output — ideal for Arduino, Raspberry Pi, ESP32, and other microcontroller projects.

Digital temperature and humidity sensor module with single‑wire output — ideal for Arduino, Raspberry Pi, ESP32, and other microcontroller projects.

Digital temperature and humidity sensor module with PCB, offering high‑precision measurement over a wide range. Ideal for microcontroller projects including Arduino, ESP32, and Raspberry Pi.

Compact soil moisture sensor module to monitor soil water content. Provides analog and digital output for easy interfacing with Arduino, ESP32, Raspberry Pi, and other microcontrollers. Ideal for automatic irrigation and smart gardening projects.

Rain drop sensor module designed to detect water presence and rainfall intensity, ideal for weather monitoring systems, automation projects, and Arduino-based applications.

HC-SR04 ultrasonic distance sensor module provides accurate distance measurements using sound waves. Compatible with Arduino, ESP32, Raspberry Pi, and other microcontrollers. Ideal for obstacle detection, robotics, level measurement, and automation projects.

Waterproof Ultrasonic Obstacle Distance Sensor Module is a rugged ultrasonic ranging sensor designed to measure distance and detect obstacles in outdoor or wet environments using reflected sound waves.

Compact infrared (IR) sensor module for obstacle detection and line tracking. Provides digital output when it detects objects. Ideal for Arduino, ESP32, Raspberry Pi, and other microcontroller projects.

HC-SR501 PIR motion sensor module detects human or animal movement using infrared. Provides digital output compatible with Arduino, ESP32, Raspberry Pi, and other microcontrollers. Ideal for security systems, automatic lighting, and motion-activated devices.

Adjustable infrared (IR) proximity sensor module with adjustable detection range (approx. 3 – 50 cm or up to 80 cm) and digital output — ideal for obstacle detection, robotics, automation, and microcontroller projects.

MPR121 is a capacitive touch sensor module that provides up to 12 touch inputs using simple I2C communication.

High-sensitivity gas sensor module for detecting LPG, methane, propane, hydrogen, smoke, and alcohol. Ideal for Arduino and microcontroller projects.

Highly sensitive alcohol gas sensor module that detects alcohol/ethanol vapors with both analog and digital outputs — perfect for Arduino, ESP32, Raspberry Pi, and other microcontroller projects.

High‑sensitivity methane and natural gas sensor module with both analog and digital outputs. Perfect for Arduino, ESP32, Raspberry Pi, and other microcontroller projects for gas leakage detection and safety systems.

Sensor Type: Gas Sensor Module Model: MQ-6 Detectable Gas: LPG, Propane, Butane Operating Voltage: 5V DC Output Type: Analog Output (A0) & Digital Output (D0) Sensitivity Adjustment: Onboard Potentiometer Interface: Compatible with Microcontrollers Indicator: Power and Output LED

R307 is a biometric fingerprint sensor module for authentication, security, and Arduino projects.

Compact heart rate (pulse) sensor module for Arduino, ESP32, Raspberry Pi, and other microcontroller projects. Detects pulse rate through fingertip or earlobe and provides analog output for real-time monitoring.

MAX30100 is an integrated heart rate and SpO₂ (blood oxygen) sensor module. It is widely used in wearable, medical, and Arduino-based health monitoring projects.

TEC1-12706 is a Peltier module used for heating and cooling applications by creating a temperature difference when powered.

100Ω (100E) 1/4W 0805 Surface Mount Chip Resistor ±1% is a precision SMD resistor designed for accurate resistance and stable performance in PCB electronic circuits.

10K (103) trimpot variable resistor designed for precise adjustment and calibration in electronic circuits, ideal for PCB applications and DIY electronics projects.

10kΩ 1/4W 0805 Surface Mount Chip Resistor ±1% is a precision SMD resistor designed for accurate resistance and stable performance in PCB electronic circuits.

6.8kΩ (6K8) 1/4W 0805 Surface Mount Chip Resistor ±1% is a precision SMD resistor designed for accurate resistance and reliable performance in compact PCB electronic circuits.

High-value 100KΩ DIP resistor with 1/4 Watt rating, ideal for pull-up/down circuits, signal conditioning, and general electronics applications.

Reliable 1KΩ DIP resistor with 1/4 Watt rating, ideal for general-purpose electronics, current limiting, and voltage divider circuits.

Durable 220Ω DIP resistor with 1/4 Watt rating, ideal for current limiting in LED circuits and general-purpose electronic applications.

Reliable 330Ω DIP resistor with 1/4 Watt power rating, perfect for current limiting and general electronic circuit applications.

Economical 47KΩ DIP resistor (1/4W) – 2nd grade, suitable for general-purpose electronic circuits where standard tolerance is acceptable.

High-quality 10KΩ DIP resistor with 1/4 Watt rating, ideal for pull-up, pull-down, and general-purpose electronic circuits.

The SMD Resistor 0603 1KΩ (1K) 1% is a compact, high-precision surface-mount resistor designed for reliable performance in modern electronic circuits and high-density PCBs.

22 Ohm 0.25 W Metal Film Resistor is a precision through-hole resistor that delivers stable resistance with tight tolerance, low noise, and reliable performance for general-purpose electronic circuits.

16pF ceramic capacitor commonly used in crystal oscillator circuits, RF applications, and high-frequency signal filtering with stable capacitance and low loss.

2200µF 16V radial electrolytic capacitor with 10x20mm size used for power supply filtering, energy storage, and smoothing applications in electronic circuits.

104 ceramic disc capacitor (0.1µF / 100nF) 50V used for decoupling, noise filtering, and signal coupling in electronic circuits.

470µF 50V radial electrolytic capacitor used for power supply filtering, energy storage, and voltage smoothing in electronic circuits.

103M 1KV ceramic disc capacitor (10nF / 0.01µF) with 5.5mm lead spacing used for high voltage filtering, coupling, and noise suppression in electronic circuits.

22pF ceramic capacitor designed for high-frequency circuits, crystal oscillators, RF applications, and signal filtering with stable performance and low loss.

Compact 2-in-1 pocket screwdriver featuring both Flat Head and Phillips Head tips in a single tool. Lightweight, durable, and ideal for electronics repair, household maintenance, and DIY projects.

Compact 2-in-1 pocket screwdriver featuring both Flat Head and Phillips Head tips in a single tool. Lightweight, durable, and ideal for electronics repair, household maintenance, and DIY projects.

Compact and durable 130mm Wire Stripper Cutter (E-2024), ideal for precise wire stripping and cutting in electrical and DIY applications.

Compact and durable 5-in-1 precision screwdriver set featuring interchangeable flat and Phillips screwdriver bits. Comes with a sturdy storage case, making it ideal for electronics repair, DIY projects, watches, toys, and household maintenance.

Side Cutting Plier 150 mm (Estman) is a durable hand tool designed for clean cutting of wires and pins, ideal for electrical, automotive, and workshop applications

Eastman Combination Plier Auto Black 200 mm (Double Colour Sleeve) is a heavy-duty 8-inch multipurpose plier designed for gripping, cutting, bending, and twisting wires in electrical and automotive applications.

Long Nose Plier 6 Inch (Estman) is a precision hand tool designed for gripping, bending, and cutting wires in tight or hard-to-reach areas, ideal for electrical, automotive, and hobby work.

Professional 6-piece precision screwdriver set designed for repairing electronics, watches, eyeglasses, mobile phones, laptops, and other precision devices. Made from durable steel and supplied in a compact storage case.

Digital temperature and humidity sensor module with PCB, offering high‑precision measurement over a wide range. Ideal for microcontroller projects including Arduino, ESP32, and Raspberry Pi.

18650 Cell Holder (1×3) is a sturdy plastic battery holder designed to securely mount three 18650 lithium cells in a compact, organized layout for battery pack and electronics projects.

4-node smart switch with dual WiFi & Bluetooth connectivity, app and voice control support, timer/scheduling features, and easy retrofit installation. Made in India for modern smart home automation

22pF ceramic capacitor designed for high-frequency circuits, crystal oscillators, RF applications, and signal filtering with stable performance and low loss.

High-quality 32700 insulation paper ring designed for battery protection, ensuring safe insulation and preventing short circuits.

RS-12 2 pin black rocker switch used for ON/OFF power control in electronic devices, appliances, and DIY projects.

A compact 2S NMC Battery Management System (BMS) rated at 4A, designed to provide reliable protection and safe operation for lithium-ion battery packs with SLCT connector interface.

22 Ohm 0.25 W Metal Film Resistor is a precision through-hole resistor that delivers stable resistance with tight tolerance, low noise, and reliable performance for general-purpose electronic circuits.

1N4007 DIP Diode is a general-purpose axial rectifier diode used for high-voltage rectification, reverse polarity protection, and power supply circuits.

High-quality 2.2KΩ DIP resistor with 1/4 Watt power rating, ideal for general-purpose electronic circuits, offering stable performance and reliable resistance for DIY and professional applications.

Reliable 1KΩ DIP resistor with 1/4 Watt rating, ideal for general-purpose electronics, current limiting, and voltage divider circuits.

TP4056 1A Li-Ion Battery Charging Board with micro USB is a compact, low-cost charging module that provides safe and efficient charging for single-cell lithium-ion or lithium-polymer batteries at up to 1 A via a standard micro-USB input.

Copper Busbar (68×20×2 mm) High-conductivity copper strip used for electrical power distribution in panels and switchgear. Provides low resistance, high current-carrying capacity, and reliable connections. Suitable for industrial and commercial electrical applications.

This voltage sensor module is used to measure DC voltage using Arduino. It safely converts high voltage into a readable analog signal.

1000KV Brushless Motor is a high-performance BLDC motor used in drones, RC planes, and robotics applications.

BMS LFP 04S 20A with Connector (SLCT) is a reliable battery management system designed for 4-series (4S) LiFePO₄ battery packs, offering robust protection, cell balancing, and a pre-wired connector for easy installation.

18650 Cell Holder (1×2) is a durable plastic battery holder designed to securely mount two 18650 lithium cells in a compact and organized configuration for battery pack and electronics projects.

Compact 2-pin RGB/bi-color LED designed for indication and lighting applications. Its two-terminal design makes it suitable for electronic circuits, DIY projects, control panels, and LED-based projects.

5x20mm small glass fuse rated at 2A used for overcurrent protection in power supplies, electronic devices, and appliances.

40A Small Blade Fuse is a compact automotive-style fuse designed to deliver dependable overcurrent protection for low-voltage electrical and electronic circuits.

High-quality 2.54mm pitch 40-pin female Berg strip connector designed for PCB mounting, prototyping, and electronic circuit connections. Ideal for Arduino, embedded systems, development boards, and DIY electronics projects.

High-quality 2.54mm pitch 40-pin male Berg strip connector designed for PCB mounting, prototyping, and electronic circuit connections. Ideal for Arduino, embedded systems, development boards, and DIY electronics projects.

A 40-pin Zero Insertion Force (ZIF) IC socket designed for easy insertion and removal of DIP integrated circuits during programming, testing, prototyping, and development.

BO Wheel is a lightweight plastic or rubber wheel used in robotics and DIY projects. Ideal for Arduino, Raspberry Pi, and small motorized vehicles.

Compact single 18650 Battery Holder with red and black wire leads, designed to securely hold one18650 Battery Holder and provide convenient power connections for electronic circuits and DIY projects.

A compact AC voltage tester screwdriver with an insulated yellow handle, designed to detect the presence of AC voltage in electrical wiring, terminals, sockets, and circuits.

A flexible multicolor ribbon cable supplied in a 5-meter roll, ideal for making organized connections between electronic circuits, PCBs, headers, switches, sensors, and other electronic modules.

A 2-pin AC power cord with bare red and blue wire ends, designed for connecting electrical and electronic equipment to an AC power supply. Suitable for DIY projects, power supplies, appliances, and electronic circuits.

A 22nF (0.022µF) radial-lead ceramic capacitor suitable for filtering, coupling, timing, noise suppression, and general electronic circuit applications. The “223” marking indicates a capacitance value of 22nF.

5x20mm small glass fuse rated at 2A used for overcurrent protection in power supplies, electronic devices, and appliances.

The 3-Pin Limit Switch is a compact mechanical switch designed to detect the presence, position, or movement of objects in electronic and automation systems. It features a lever actuator and three terminals for common, normally open (NO), and normally closed (NC) connections, making it suitable for robotics, Arduino projects, CNC machines, and industrial control applications.

RS 2 pin small Red rocker switch used for ON/OFF power control in electronic devices, appliances, and DIY projects.

The Active Buzzer Module is a compact sound-producing electronic component designed to generate an audible tone when powered. It is suitable for Arduino projects, alarm systems, robotics, electronic circuits, and embedded applications. Its PCB-mounted design allows easy integration into prototypes and control systems.

ESP32-WROOM-32 is a powerful Wi-Fi and Bluetooth/Bluetooth LE MCU module designed for IoT applications, robotics, and smart devices.

The L293D Motor Driver Shield for Arduino UNO is a convenient motor control board designed to drive DC motors and stepper motors directly from an Arduino. It provides screw terminals for easy motor and power connections, making it suitable for robotics and DIY projects.

Compact 2-pin RGB/bi-color LED designed for indication and lighting applications. Its two-terminal design makes it suitable for electronic circuits, DIY projects, control panels, and LED-based projects.

Compact 10x10cm single-sided universal PCB prototype board with standard 2.54mm hole pitch, ideal for electronic prototyping, Arduino projects, DIY circuits, and permanent component mounting.

Compact 8x12cm single-sided universal PCB prototype board with standard 2.54mm hole pitch, ideal for electronic prototyping, Arduino projects, DIY circuits, and permanent component mounting.

High-performance ESP32 NodeMCU development board with integrated 2.4GHz Wi-Fi and Dual-Mode Bluetooth (Classic + BLE). Features a stable Silicon Labs CP2102 USB-to-UART driver and a compact, 30-pin breadboard-friendly layout ideal for IoT applications and smart home automation prototyping.

32140 Cell Holder (1X3) is a robust plastic holder designed to securely organize 3 pieces of 32140 lithium cells in a compact grid layout for battery pack assembly.

Reliable 12V 2A power adapter with 2-pin plug, ideal for powering LED strips, CCTV cameras, routers, and small electronic devices. Compact, efficient, and safe for daily use.

High-performance 8S 100A BMS for LiFePO4 (LFP) batteries with same port design and advanced protection features. Ideal for battery packs used in solar systems, EVs, and backup power solutions.

High-performance L-shaped BO motor designed for robotics and DIY projects, offering efficient torque, compact design, and easy mounting for smooth movement and control.

7808 voltage regulator IC provides a stable 8V output, ideal for power supply circuits, electronics projects, and voltage regulation applications.

10K (103) trimpot variable resistor designed for precise adjustment and calibration in electronic circuits, ideal for PCB applications and DIY electronics projects.

The MG995 180° Servo Motor by TowerPro is a high-torque position control motor designed for robotics and automation. It offers precise angle control up to 180° and is ideal for Arduino and RC applications.

The Digital DC Voltage & Current Meter (30V/10A) is a compact panel-mounted device used to measure DC voltage and current simultaneously. It features a bright digital display for accurate and easy readings in power supply and electronics applications.

The SMD Resistor 0603 1KΩ (1K) 1% is a compact, high-precision surface-mount resistor designed for reliable performance in modern electronic circuits and high-density PCBs.

The 7812 Voltage Regulator IC is a fixed linear voltage regulator that provides a stable 12V DC output. It is widely used in power supply circuits to regulate voltage for electronic devices.

The 5MM LDR (Light Dependent Resistor) is a light-sensitive component whose resistance changes based on light intensity. It is widely used in automatic lighting systems and sensor-based electronic projects.

High-value 330KΩ DIP resistor with 1/4 Watt rating, ideal for high-resistance circuits, signal filtering, and voltage division applications.

Reliable 12V 1A DC power adapter designed to convert AC to stable DC output for powering electronic devices safely and efficiently.

5V Passive Buzzer Small B10/B12 is a compact sound component used in electronic circuits that requires an external signal to generate tones. Ideal for Arduino, microcontroller projects, and alarm systems.

Piezo Electric Active Big Buzzer B27 is a loud audio indicator that generates sound when power is applied. Ideal for alarms, Arduino projects, security systems, and electronic alert circuits.

10K Potentiometer is a rotary variable resistor used to control voltage and adjust signal levels in electronic circuits. Commonly used for Arduino projects, audio control, and analog input adjustment.

Display Type: 7 Segment LED Display Digits: 1 Digit Display Size: 0.56 Inch Color: Red Configuration: Common Cathode Operating Voltage: 1.8V – 2.2V per segment Mounting Type: Through Hole (DIP) Pins: 10 Pin

Type: PNP Bipolar Junction Transistor (BJT) Model: BC557 Collector-Emitter Voltage (Vce): −45V Collector Current (Ic): −100mA Power Dissipation: 500mW Package Type: TO-92 Mounting Type: Through Hole Pins: 3 (Emitter, Base, Collector)

7805 is a fixed 5V linear voltage regulator IC in TO-220 package widely used to provide stable 5V output for electronic circuits and microcontroller projects.

104 ceramic disc capacitor (0.1µF / 100nF) 50V used for decoupling, noise filtering, and signal coupling in electronic circuits.

5x20mm small glass fuse rated at 5A used for overcurrent protection in power supplies, electronic devices, and appliances.

16MHz crystal oscillator used for precise clock generation in microcontrollers, Arduino boards, and embedded electronic circuits.

The 7905 is a fixed negative voltage regulator IC that provides a stable −5V output from a negative input voltage. It is widely used in dual power supply circuits, analog systems, and instrumentation applications.

100nF 50V SMD Capacitor is a compact multilayer ceramic capacitor used for decoupling, filtering, and noise suppression in PCB electronic circuits.

5.1kΩ (5K1) 1/4W Surface Mount Chip Resistor ±1% is a precision SMD resistor designed for accurate resistance and stable performance in compact PCB electronic circuits.

510Ω (510E) 1/4W Surface Mount Chip Resistor ±5% is a compact SMD resistor designed for reliable current limiting and voltage control in PCB electronic circuits.

Arduino Nano CH340 with pre-soldered pins is a compact microcontroller board based on ATmega328P, ready for breadboard use and DIY projects.

Arduino Nano CH340 unsoldered board is a compact microcontroller board based on ATmega328P with CH340 USB-to-serial chip, ideal for DIY electronics projects.

3.5-inch TFT LCD touchscreen display designed for Arduino UNO, ideal for graphics, menus, and interactive projects.

3.5-inch TFT LCD is a touchscreen display specially designed for Raspberry Pi, offering compact size and clear color output.

Efficient DC-DC step-down (buck) converter module based on the LM2596 IC. Converts higher DC voltage to lower adjustable output voltage with high efficiency. Ideal for Arduino, ESP32, power supplies, battery chargers, and DIY electronics projects.

Raspberry Pi 4 Model B – Quad-Core 1.8 GHz SBC, up to 8 GB LPDDR4, Dual 4K HDMI, Gigabit Ethernet & USB 3.0

MMSZ5245 – 15 V, 0.5 W Zener diode in SOD‑123 package, ±5% tolerance, RoHS compliant

BAS40 – 40 V, 200 mA Schottky barrier diode in SOT‑23 package, surface-mount

This Level Converter- 4 Channel features four high speed bi-directional 4 channels, allowing for safe and easy communication between devices operating at different logic levels.